Security/Detection
1MView 2 Models
- Active Area Size 1mm x 1mm
- SNR Range 6,173 - 14,035
- Temperature Coefficient of Responsivity - .36%/°C
- Package Size TO-5
- DX-0062
-
- Package Size TO-5
- Thermistor NA
- Filter(s) 8.0 - 14.0μm Silicon
- Encapsulating Gas Xenon
- DX-0022
-
- Package Size TO-5
- Thermistor NA
- Filter(s) 8.0 - 14.0μm Silicon
- Encapsulating Gas Argon
Features
- A thin film-based thermopile
- Good signal-to-noise ratio
- Time constant of 32ms with Argon encapsulation gas
Applications
- Excellent for non-contact temperature measurement and fire suppression
Benefits
- Small active area with good signal-to-noise ratio
2MView 2 Models
- Active Area Size 2mm x 2mm
- SNR Range 12,739 - 33,333
- Temperature Coefficient of Responsivity - .36%/°C
- Package Size TO-5
- DX-0165
-
- Package Size TO-5
- Thermistor N/A
- Filter(s) 0.1 - 7.0μm Sapphire
- Encapsulating Gas Xenon
- DX-0164
-
- Package Size TO-5
- Thermistor N/A
- Filter(s) 0.1 - 7.0μm Sapphire
- Encapsulating Gas Argon
Features
- A thin film-based single element thermopile detector that offers the world’s highest sensitivity in a TO-5 package
- Low noise voltage of 12.8nV/√Hz.
Applications
- Excellent for gas analysis, fire detection and non-contact temperature measurement
Benefits
- Extremely high output and signal-to-noise ratio
Motion Detector - Presence SensorView 1 Model
A passive infrared presence sensing module designed for the system designer interested in a functional subsystem for low power and battery powered applications. Presence sensing up to 2 feet.
Features
- Fully integrated design
- Small footprint (0,55″x 0.91″)
- Easily reconfigured (trigger, alarm and duration levels)
- Sensing range up to 2 feet
Applications
- “Smart Washrooms” automatic water actuation
- “Smart home” for lighting, ambiance
- Energy conservation, HVAC & lighting control for hotel rooms
- Presence sensing for security, convenience
- Industrial monitoring
- Human detection for security
- Remote monitor of elderly patients
- Temperature control module & trigger
Benefits
- A fully functional subsystem with minimum cost and integration implications
ST60View 1 Model
- Active Area Size .61mm x .61mm
- SNR Range 2,365 - 4,792
- Temperature Coefficient of Responsivity -.04%/°C
- Package Size TO-5
- DX-0439
-
- Package Size TO-5
- Thermistor N/A
- Filter(s) 5μm cut-on LWP Si
(Long Wave Pass Silicon) - Encapsulating Gas Nitrogen
Features
- A silicon based thermopile providing lowest cost solutions in a small active area.
- Time constant of 18ms with Nitrogen encapsulation gas
- Delivers a very low Temperature Coefficient of Responsivity
- This detector has a very short thermal shock
Applications
- Excellent for non-contact temperature, fire suppression, horizon sensing and gas analysis
Benefits
- Low cost and small active area size with medium output
Thermacon - Request to Exit SensorView 1 Model
Thermacon is a concealed passive infrared (PIR) sensor that detects the presence of natural body heat and activates a relay. Relay activation begins when the detection area is entered and remains on for the duration of the preset relay timing. This item is not RoHS compliant.
Features
- Concealed, silent, passive infrared motion sensor unit
Applications
- Exit / entry control
- Guard tour detection
- Personnel motion detection
- Automatic Time delays
- Spot detection
Benefits
- Totally passive detection
- No ultrasonic or microwave emission
- Detects natural body heat
- Automatic circuit shunt
- RFI resistant
- No cross interference between units
- Will not detect through walls, doors or windows
- Operates from 12 to 24 volts AC or DC
- Ceiling mounting
- Concealed installation
- Single or multiple unit applications
Your Cart
Item added to cart.
View Cart
Privacy Policy
What information do we collect?
We collect information from you when you register on our site or place an order.
When ordering or registering on our site, as appropriate, you may be asked to enter your: name, e-mail address, mailing address, phone number or credit card information. You may, however, visit our site anonymously.
What do we use your information for?
Any of the information we collect from you may be used in one of the following ways:
To improve our website
We continually strive to improve our website offerings based on the information and feedback we receive from you.
To process transactions
Your information, whether public or private, will not be sold, exchanged, transferred, or given to any other company for any reason whatsoever, without your consent, other than for the express purpose of delivering the purchased product or service requested.
How do we protect your information?
We implement a variety of security measures to maintain the safety of your personal information when you place an order
We offer the use of a secure server. All supplied sensitive/credit information is transmitted via Secure Socket Layer (SSL) technology and then encrypted into our Payment gateway providers database only to be accessible by those authorized with special access rights to such systems, and are required to?keep the information confidential.
After a transaction, your private information (credit cards, social security numbers, financials, etc.) will not be stored on our servers.
Do we use cookies?
Yes. Cookies are small files that a site or its service provider transfers to your computers hard drive through your Web browser (if you allow) that enables the sites or service providers systems to recognize your browser and capture and remember certain information. We use cookies to help us remember and process the items in your shopping cart.
Do we disclose any information to outside parties?
We do not sell, trade, or otherwise transfer to outside parties your personally identifiable information. This does not include trusted third parties who assist us in operating our website, conducting our business, or servicing you, so long as those parties agree to keep this information confidential. We may also release your information when we believe release is appropriate to comply with the law, enforce our site policies, or protect ours or others rights, property, or safety. However, non-personally identifiable visitor information may be provided to other parties for marketing, advertising, or other uses.
Childrens Online Privacy Protection Act Compliance
We are in compliance with the requirements of COPPA (Childrens Online Privacy Protection Act), we do not collect any information from anyone under 13 years of age. Our website, products and services are all directed to people who are at least 13 years old or older.
Online Privacy Policy Only
This online privacy policy applies only to information collected through our website and not to information collected offline.
Your Consent
By using our site, you consent to our websites privacy policy.
Changes to our Privacy Policy
If we decide to change our privacy policy, we will post those changes on this page.
These items are pulled from the terms and conditions of the store for your convenience, read the full terms here.
Shipping and Fulfillment
Method of Shipping. All items shipped by DRC shall be prepared and packaged for shipment in a manner that will prevent damage in transit. The prices of the Products include net additional charges relating to transportation (e.g., packing, cartage, shipping, taxes, insurance, or duties). All containers shall contain packing sheets listing each item in the order and the related identification number.
Risk of Loss. Products are FOB DRC’s manufacturing facility in Dexter, Michigan.
Coordination. DRC shall give Customer prompt notice of any event that could reasonably affect DRC’s ability to deliver Products pursuant to the terms of any accepted Purchase Order, by way of example, labor dispute, shortage of proper raw materials and components, natural disaster, man-made disaster, inability to secure licenses, or government action.
Fulfillment. Typical order fulfillment is 3 days, Monday – Friday.
Return Policy
After receipt of Products, Customer shall have thirty (30) days to inspect Products for damage or nonconformance. If Customer provides notice and documentation that any of the Products fail to conform in any material respect, DRC shall immediately use its best efforts to remedy that nonconformity within ten (10) business days. In the event that DRC is unable to remedy such nonconformity, Customer may (i) reject the nonconforming Products and obtain a refund of any fees and expenses paid for such Products, (ii) give DRC another attempt to remedy the nonconformance, or (iii) accept the Products AS IS, with no warranty of any kind, at a reduced price agreed upon by the parties.
Product Warranties and Exclusive Remedies; Disclaimer
Limited Warranty. DRC warrants that Products shall materially conform to their applicable specifications and documentation, and shall be free from defects in materials and workmanship, for a period of one (1) year from the date of shipment when used as set forth in DRC’s documentation. All Products provided will be new and will not be repaired, refurbished, or remanufactured. During the warranty period, DRC will use its best efforts to repair or replace any nonconforming Product within ten (10) days after receipt of written notice of such nonconformance and Customer’s provision of any data, output, or other documentation of the nonconformance. DRC shall provide new, conforming Products by overnight shipment if so requested by Customer and if such Products are in DRC inventory. DRC shall be responsible for all transportation and shipping costs associated with its remedy of defective Products. The duration of the warranty shall be extended by any time period of non-use due to breach of warranty. These remedies are the sole and exclusive remedy available to Customer in the event of a breach of warranty.
DISCLAIMER. DRC EXPRESSLY DISCLAIMS, AND CUSTOMER HEREBY WAIVES, ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Not Consumer Goods. The Products are not “consumer goods.” Customer has independently determined that the Products are appropriate for Customer’s needs. Regardless of any discussions or information exchange Customer may have had with DRC representatives, Customer acknowledges that it is solely and exclusively responsible for its use of the Products, including their storage, integration with other components, modification or adaptation, packaging, advertising, promotion, labeling, and product claims. DRC does not warrant that the Products will be safe for any particular use intended by Customer. Customer agrees not to sue DRC for any claims relating to the use of the Products by Customer or its downstream users, customers, purchasers, resellers, or other third parties in privity with Customer.
Terms and Conditions Governing Online Sales
These terms govern the purchase and sale of products through the website of Dexter Research Center, Inc. All online sales are contingent upon acceptance of these terms, so please review them carefully.
1. The Online Contract is a Legal Agreement.
1.1 Legal Agreement. These “Terms and Conditions” (“Terms”) are a part of the online contract (“Contract”) between Dexter Research Center, Inc. (“DRC”), as the supplier of certain products (“Products”), and the person, company, institution, or entity (“Customer”) placing the Purchase Order.
1.2 Entire Contract. The following documents comprise the entire Contract between the parties with respect to Products purchased online by Customer from DRC: (a) the Terms; (b) the Purchase Order and (c) DRC’s Privacy Policy, located at http://dexter.content-hub.net/shop/privacy-policy/.
1.3 Sole Terms. The Contract supersedes all promises, understandings, and prior or contemporaneous agreements on the same subject matter. No amendment, modification or supplement to this Contract shall be binding unless it is in writing, signed by an authorized representative of each party.
2. Website. DRC may modify the content at its Website (“Site”) at any time for any reason, including the availability and pricing of Products. Customer’s use of the Site is personal to Customer, is not transferable, and is subject to any limits established by DRC or by Customer’s credit card company. The links on DRC’s Sites to other websites are provided for informational purposes do not necessarily indicate endorsement by DRC or such third parties.
3. Acceptance of Terms. The Contract is effective when DRC receives an electronic communication generated by its system indicating Customer has agreed to the Terms, completed a Purchase Order and made all payments required at the point of acceptance of the Contract.
4. Notices. All required communications shall be transmitted via electronic mail to the address of the Customer at its address on the Purchase Order and to DRC at the address indicated at the point of payment. All communications will be deemed given when transmitted. Please maintain a copy of your email communications to DRC.
5. Accounts; Payments; Taxes.
5.1 U.S. Dollars. All prices and fees are stated in U.S. Dollars.
5.2 Customer Obligations. Customer represents and warrants that (a) the credit card information provided on the purchase order is accurate and complete, (b) Customer shall be responsible for payment of all purchases, whether honored by Customer’s credit card company, (c) Customer shall pay all applicable taxes, and shipping and handling charges, as set forth in any Purchase Order or other communication regarding payment
6. Change Orders. Customer may, at any time prior to shipment, request modification of a Purchase Order via a Change Order in any of the following respects: product identification; quantity; ship date; packing requirements; or delivery schedules, by contacting us at (734) 426-3921. DRC is not obligated to accept such requests. If DRC believes it can accommodate a Change Order request, DRC shall advise Customer of the revised information as to delivery dates for the Products and final pricing information. Customer shall confirm via electronic mail whether it accepts or rejects the proposed new terms of sale.
7. Shipping Policy.
7.1 Method of Shipping. All items shipped by DRC shall be prepared and packaged for shipment in a manner that will prevent damage in transit. The prices of the Products include net additional charges relating to transportation (e.g., packing, cartage, shipping, taxes, insurance, or duties). All containers shall contain packing sheets listing each item in the order and the related identification number.
7.2 Risk of Loss. Products are FOB DRC’s manufacturing facility in Dexter, Michigan.
7.3 Coordination. DRC shall give Customer prompt notice of any event that could reasonably affect DRC’s ability to deliver Products pursuant to the terms of any accepted Purchase Order, by way of example, labor dispute, shortage of proper raw materials and components, natural disaster, man-made disaster, inability to secure licenses, or government action.
8. Delivery, Inspection, and Acceptance of Products. After receipt of Products, Customer shall have thirty (30) days to inspect Products for damage or nonconformance. If Customer provides notice and documentation that any of the Products fail to conform in any material respect, DRC shall immediately use its best efforts to remedy that nonconformity within ten (10) business days. In the event that DRC is unable to remedy such nonconformity, Customer may (i) reject the nonconforming Products and obtain a refund of any fees and expenses paid for such Products, (ii) give DRC another attempt to remedy the nonconformance, or (iii) accept the Products AS IS, with no warranty of any kind, at a reduced price agreed upon by the parties.
9. Product Warranties and Exclusive Remedies; Disclaimer.
9.1 Limited Warranty. DRC warrants that Products shall materially conform to their applicable specifications and documentation, and shall be free from defects in materials and workmanship, for a period of one (1) year from the date of shipment when used as set forth in DRC’s documentation. All Products provided will be new and will not be repaired, refurbished, or remanufactured. During the warranty period, DRC will use its best efforts to repair or replace any nonconforming Product within ten (10) days after receipt of written notice of such nonconformance and Customer’s provision of any data, output, or other documentation of the nonconformance. DRC shall provide new, conforming Products by overnight shipment if so requested by Customer and if such Products are in DRC inventory. DRC shall be responsible for all transportation and shipping costs associated with its remedy of defective Products. The duration of the warranty shall be extended by any time period of non-use due to breach of warranty. These remedies are the sole and exclusive remedy available to Customer in the event of a breach of warranty.
9.2 DISCLAIMER. DRC EXPRESSLY DISCLAIMS, AND CUSTOMER HEREBY WAIVES, ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
9.3 Not Consumer Goods. The Products are not “consumer goods.” Customer has independently determined that the Products are appropriate for Customer’s needs. Regardless of any discussions or information exchange Customer may have had with DRC representatives, Customer acknowledges that it is solely and exclusively responsible for its use of the Products, including their storage, integration with other components, modification or adaptation, packaging, advertising, promotion, labeling, and product claims. DRC does not warrant that the Products will be safe for any particular use intended by Customer. Customer agrees not to sue DRC for any claims relating to the use of the Products by Customer or its downstream users, customers, purchasers, resellers, or other third parties in privity with Customer.
10. Confidentiality. Each party shall treat as confidential any tangible information marked as “Confidential” and shall not disclose such information to any third party, other than as required by law.
11. Intellectual Property. For a period of three (3) years from the date of sale, if the Products become the subject of a third party claim of infringement or misappropriation (or, in DRC’s opinion, may become the subject of a claim), DRC shall promptly provide substitute Products that avoid the claim of infringement/misappropriation, or secure a license from the party alleging infringement so as to allow Customer to use and sell the Products that are the subject of such a claim. The foregoing is the sole and exclusive remedy available to Customer in the event of third party claims relating to intellectual property rights.
12. Limitations of Liability for Damages. IN NO EVENT SHALL DRC BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, OR FOR LOST PROFITS OR BUSINESS INTERRUPTION LOSSES, ARISING OUT OF OR IN CONNECTION WITH THIS CONTRACT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CERTAIN TYPES OF DAMAGES, THE LIABILITY OF DRC, ITS OFFICERS, DIRECTORS, EMPLOYEES, AFFILIATES, AGENTS, AND SUPPLIERS IN SUCH JURISDICTIONS SHALL BE LIMITED TO THE FULLEST EXTENT PERMITTED BY LAW.
13. Force Majeure. DRC shall not be liable for delay or failure to perform caused in whole or part by circumstances beyond its reasonable control, including, without limitation, acts of God, fire, flood, war, weather, transportation delays, terrorism, vandalism, data destruction, government action, strikes, lockouts or other serious labor disputes, shortage of or inability to obtain material or equipment, or power failures.
14. General Terms; Dispute Resolution; Arbitration.
14.1 Place of Performance. This Contract is executed (signed) and performed in Michigan. It shall be governed by and construed in accordance with the laws of the State of Michigan (without regard to conflict of law principles). The Site is based in, and the Products are provided from, Dexter, Michigan USA. The Site shall be deemed a passive website that does not give rise to personal jurisdiction over DRC, either specific or general, in jurisdictions other than Michigan. This Contract shall be governed by the internal substantive laws of the State of Michigan, without respect to its conflict of laws principles.
No waiver by DRC shall be implied. Any waiver of any term of this Contract must be in writing and signed by an officer of DRC.
14.3 Severability. If any portion of this Contract is found to be unenforceable, such portion will be modified to reflect the parties’ intention and only to the extent necessary to make it enforceable. The remaining provisions of this Contract will remain in full force and effect.
14.4 Statute of Limitations. Any litigation or other dispute resolution arising out of or related to this Contract must be commenced within one (1) years after the date of the event giving rise to the claim. Otherwise, such causes of actions are permanently barred.
14.5 International Considerations. DRC makes no representations that the Site or Products are available for purchase use in locations other than the United States. Customers are responsible for compliance with applicable laws.
15. Dispute Resolution; Arbitration. The parties shall attempt to resolve any disputes through good faith business negotiations or mutually agreed upon facilitated negotiations/mediation (with each party liable for half the fees of the facilitator/mediator). If such negotiations or facilitation/mediation is unsuccessful or is not commenced within thirty (30) days of written notice to the other party of a claim or dispute (“Claim”), the Claim shall be resolved by arbitration through the American Arbitration Association (Commercial Panel) in Ann Arbor, Michigan. There shall be one (1) arbitrator. The arbitrator shall have demonstrated experience in the technical field that is the subject matter of the Agreement. The arbitrator shall have the power to award legal and equitable remedies and shall be required to make written findings of fact and conclusions of law. The language of the proceedings shall be English. Judgment upon the award may be entered in any court having jurisdiction thereof.
16. Legal Power. The undersigned has actual authority to enter into this Contract and to bind the business organization identified as the account holder.